非全日制研究生线上线下混合式教学模式研究 ——以《现代电气控制技术》为例

随着教育信息化技术的发展，线上线下混合式教学模式已成为一种趋势。为了解决非全日制研究生课堂教学召集困难、效果不佳等问题，提出了基于“互联网＋虚拟仿真技术”的线上线下混合式教学模式。本文以控制工程专业学位研究生为例，结合《现代电气控制技术》课程，探讨了线上线下混合式教学实现途径、师生互动方法、项目驱动案例教学法以及电气控制系统虚拟仿真实验平台的构建方法，切实提升非全日制研究生的培养质量。     

三维颗粒物质的能量最小化模拟方法

颗粒物质是大量宏观颗粒的集合,广泛存在于自然界,日常生活和工业生产中.颗粒物质的运动表现出非常复杂的现象,如堵塞(jamming)等.颗粒物质体系的定量研究仍是一个巨大的挑战.本文采用能量最小化方法对颗粒物质进行准静态模拟.对一些典型的非线性优化方法,如共轭梯度法,拟牛顿法等,通过预条件来提高这些方法的效率.这些预条件方法基于颗粒体系的几何结构和能量函数来构建.通过对一些典型的准静态过程,如压缩和剪切试验的数值模拟,观察到对三维颗粒体系,预条件方法可以有40%左右的效率提升.     

Three-dimensional graphene-carbon nanotube reinforced ceramics and computer simulation

Graphene and carbon nanotube (CNT) have been the striking reinforcements for ceramics as a function of their unique structures together with exceptional multi-performance. However, the reinforcing efficiency could only be fully confirmed if they were homogenously dispersed throughout the whole ceramic matrix. The poor dispersion properties of graphene and CNT restricted the further development of advanced carbon nanomaterials reinforced ceramic. Very recently, the hybridization of graphene and CNT was proposed to reach full utilization of graphene and CNT through preventing the aggregations in ceramic. Herein, this review discussed the preparation techniques, composition, microstructures and properties of hybrid graphene-CNT (HGC) reinforced ceramic, highlighting the hybridization strategies of graphene and CNT. Additionally, the computer simulation was employed to advance the development of three–dimensional HGC reinforced ceramics.     

Effects of water and carbon dioxide pressure on the adhesion of Na2SiO3 and K2SiO3 binders on silica sand surface: Comparison of experimental data and molecular dynamics simulation

In this study, the effects of different water amounts, CO₂ blowing pressures, Na₂O:SiO₂ and K₂O:SiO₂ ratios were studied on the bonding strength of Na₂SiO₃ and K₂SiO₃ binders. It was concluded that the increase in water content had an adverse effect on the bonding strength of CO₂-hardened Na₂SiO₃ sand. The blowing pressure did not have a linear relationship with the bonding strength, but it was closely related to the diffusion coefficient of CO₂. Based on scanning electron microscopic results, it was inferred that the low strength was caused by the formation of lamellar crystals after the adhesive was hardened. It was found that the low strength was caused by the formation of lamellar crystals after the adhesive was hardened. Based on molecular dynamics simulations, different pressures and water contents had a great influence on the diffusion coefficient of CO₂ in the silicate binder system. This research provides an important theoretical background to improve the technology of CO₂-hardened Na₂SiO₃- and K₂SiO₃-bonded sands during the casting process.     

基于GA-BP的汽车风振噪声声品质预测模型

目前对于汽车风振噪声的优化研究主要以声压级（Sound pressure level，SPL）作为单一评价指标，既不能全面反映噪声的物理属性，也无法考虑人耳对噪声的主观认知过程。为准确评价风振噪声，引入声品质，运用大涡模拟（Large eddy simulation，LES）对风振噪声进行数值仿真，根据实车道路试验判断仿真的准确性；对仿真结果进行声品质客观评价与主观评价，综合声品质客观评价参数与声品质主观评价试验结果建立BP神经网络预测模型；利用遗传算法（Genetic algorithm，GA），进一步对BP神经网络的结构参数进行优化，建立GA-BP声品质预测模型。研究结果表明，GA-BP声品质预测模型在训练速度和预测精度上都优于BP神经网络预测模型。预测模型基于声品质主客观评价结果，其预测值可以代替传统的声压级评价指标，为风振噪声提供更为准确合理的评价。     

Preliminary Structural Data Revealed That the SARS-CoV-2 B.1.617 Variant's RBD Binds to ACE2 Receptor Stronger Than the Wild Type to Enhance the Infectivity

The evolution of new SARS-CoV-2 variants around the globe has made the COVID-19 pandemic more worrisome, further pressuring the health care system and immunity. Novel variations that are unique to the receptor-binding motif (RBM) of the receptor-binding domain (RBD) spike glycoprotein, i. e. L452R-E484Q, may play a different role in the B.1.617 (also known as G/452R.V3) variant's pathogenicity and better survival compared to the wild type. Therefore, a thorough analysis is needed to understand the impact of these mutations on binding with host receptor (RBD) and to guide new therapeutics development. In this study, we used structural and biomolecular simulation techniques to explore the impact of specific mutations (L452R-E484Q) in the B.1.617 variant on the binding of RBD to the host receptor ACE2. Our analysis revealed that the B.1.617 variant possesses different dynamic behaviours by altering dynamic-stability, residual flexibility and structural compactness. Moreover, the new variant had altered the bonding network and structural-dynamics properties significantly. MM/GBSA technique was used, which further established the binding differences between the wild type and B.1.617 variant. In conclusion, this study provides a strong impetus to develop novel drugs against the new SARS-CoV-2 variants.     

基于STM32单片机的大学生体能监测仪设计与实现

体能监控仪作为生命体征监测设备,对于辅助大学生完成体能训练有很大帮助;基于STM32单片机技术,设计开发集成了多种传感器的一种大学生体能监测装备,它能够有效的检测包括心率检测、人体的步数、运动圈速、消耗卡路里等信息;该设计采用了STM32作为主控芯片,采用模块化的设计思路;在系统硬件设计方面,设计了包括STM32控制系统、心率获取电路、三轴传感器电路、显示电路以及按键电路等;同时将软件模块拆分成了初始化子程序、心率获取子程序,步数获取子程序,显示子程序等;Proteus仿真结果显示,使用STM32单片机技术设计的体能监测系统,能够运行稳定,测量心率范围60次/min~180次/min,可在心率异常时报警,同时检测步数的准确率达98%,满足体能监测任务需要,实验结果符合预期;为STM32单片机在体育运动研究信息化中应用提供参考。     

煤炭地下气化过程中温度场及其传热特征研究进展

煤炭地下气化(UCG)技术作为一种环境友好的采煤方法,可被用来开发深部煤层与矿井遗留的煤炭资源。当地下气化时,随着气化时间的推移,煤炭在煤层内部"燃烧"逐渐形成气化炉,炉内温度最高可达1 200℃。从UCG过程中的放热反应出发,综述了热量来源、温度场的变化及其传热特征等,总结了研究温度场的重要手段。分析认为,UCG是一个复杂的温热动态变化过程,在此过程中氧化还原反应、吸热和放热的可逆反应同时进行,导致了气化炉的温度场及其传热机制的复杂性。研究气化过程传热机制的方法主要有物理模拟、试验监测、理论计算和数值模拟4种,各自具有不同的适应性。其中,物理模拟的可操控性强,但是难以解决地层接触关系导致的接触热阻误差;试验监测能真实反映温度场等的变化情况,但是实际操作的经济性差;理论计算通过对气化过程的拆分,从理论角度定性定量了UCG的温度场特征,但理论计算难以考虑到温度渗流等对温度的影响;数值模拟借助计算机进行温度场的多场耦合,综合考虑了渗流、变形、温度等对传热的影响,但多场的物理耦合计算难度较大,且煤层及岩石的热物理性质随温度变化会产生较大的差异,导致数值建模的计算难度增加,制约了数值模拟方法的...     

基于CFD⁃DEM的水下切粒装置水室内颗粒流动过程数值模拟

基于CFD?DEM耦合方法，研究了颗粒在水室内的流动状态，分析了不同刀盘转速、粒子水通入量和水室出口角度对造粒过程的影响，发现提高刀盘转速、增加粒子水通入量和水室出口倾斜一定的角度都有利于水室内颗粒的排出。进一步研究了颗粒与碎屑在水室内的流动，发现在水室出口处二者的流动基本呈现出一定的分离角度。